LCD-100 Series Projector Lifts

Three positions: stowed, show, service
For small to mid-sized projectors, monitors, slide projectors, speakers, camera pan/tilts
Digital control repeatable to better than 1/16"
Cable management system
Whisper-quiet operation
Black powder coat finish (white available at additional cost & time)
Includes programmable wired hand-held remote
Accessories: optional controls - RS232, IR, RF, optional closure styles for grid tile, plenum enclosures (primer gray finish), 2' x 2' enclosures, motorized rotation, and cable pre-wire package

Product	Dimensions	Weight Capacity	Lowering Distance	Weight
LCD-104	18.5"l x 17.9"w x 5.75"h	75 lbs.	4'	65 lbs.
LCD-105	18.5"l x 17.9"w x 6.75"h	75 lbs.	5'	70 lbs.
LCD-106	18.5"l x 17.9"w x 7.75"h	75 lbs.	6'	75 lbs.
LCD-107	18.5"l x 17.9"w x 8.75"h	75 lbs.	7'	80 lbs.

Contact closure operation - 12V trigger in / out
Power requirements: 110V, 0.6 amp; 220V, 0.3 amp
Safety belt for earthquake standards
Digital self-diagnostics system
User programmable show / service positions
Specify projector / lens for proper mount / closure
Requires Display Devices mount adapter
1 year warranty

Product Information Sheet

LCD-104 Drawing (CAD)

LCD-104 Drawing (PDF)

Standard 2x2 LCD, OP3L (SAMPLE)

Lift Install Manual

LCD-104 Motor Replacement Manual

LCD Series Pillow Block Documentation

OPT9 RS-232 Interface

xxx	Mounting Adapter interface for projector. Must specify make and model number of projector and lens if projector offers lns options.
OPT-1	Ceiling Closure Frame. Used with drywall or wood ceilings. Provides 2" trim finish for projector opening. Spring-loaded and fully adjustable. Note: EBR is recommended for installations with restricted access.
OPT-1L	Lipless Ceiling Closure Frame - Provides minimal seam around projector opening for drywall or wood ceilings. Spring-loaded and fully adjustable. Note: EBR is recommended for installations with restricted access.
OPT-3	Plenum-Rated Housing With Closure Frame - Enclosed support framework and closure frame for drop-tile ceilings with plenum requirements. 2" trim finish for projector opening. Includes OPT-1 ceiling closure, spring-loaded and fully adjustable.
OPT-3L	Plenum-Rated Housing With Lipless Closure Frame. Enclosed support framework and closure frame for drop-tile ceilings with plenum requirements. Provides minimal seam around projector opening. Includes OPT-1L ceiling closure, spring-loaded and fully adjustable.
OPT-3L-2x2	2' x 2' Plenum-Rated Housing With Lipless Closure Frame for LCD-100 series only - Maximum projector size: 19" x 19" (including lens). Enclosed support framework and closure frame for drop-tile ceilings with plenum requirements. Provides minimal seam around projector opening. Includes OPT-1L ceiling closure, spring-loaded and fully adjustable.
OPT-4	Non-Plenum-Rated Housing With Closure Frame. Support framework and closure frame for drop-tile ceilings with non-plenum requirements. 2" trim finish for projector opening. Includes OPT-1 ceiling closure, spring loaded and fully adjustable.
OPT-4L	Non-Plenum Rated Housing With Lipless Closure Frame. Support framework and closure frame for drop-tile ceilings with non-plenum requirements. Provides minimal seam around projector opening. Includes OPT-1L ceiling closure, spring loaded and fully adjustable.
OPT-4L-2x2	2' x 2' Non-Plenum Rated Housing With Lipless Closure Frame for LCD-100 series only - Maximum projector size: 19" x 19" (including lens). Support framework and closure frame for drop-tile ceilings with non-plenum requirements. Provides minimal seam around projector opening. Includes OPT-1L ceiling closure, spring loaded and fully adjustable.
OPT-5	Bomb Bay Door ceiling closure system. Provides support framework and dual opening doors for non-plenum applications.
OPT-9	RS-232 Serial control interface - allows for unlimited show positions when using a third party control system (Crestron/AMX).
OPT-11A	Cable Pre Wire - Pre-wire of lift with control, signal and power cabling.
PCS-02	Power Current Sensor for projectors and Flat Panel Displays, 110V only.
EMRCM	Electronic Motorized Rotating Ceiling Mount. Adds rotation of a projector to any Display Devices projector lift. Controlled via third party RS-232 (i.e., Crestron, AMX, etc.) to allow two programmable vertical and rotational show positions. Weight capacity of 100 lbs. including closure. 110V/220V.
REM-IR	Wireless Infrared Remote Control. May be used with any motorized Display Devices product.
REM-RF	Wireless RF Remote Control. May be used with any motorized Display Devices product.
WPR-L01-W	Wall Plate Remote for all lifts. Single-gang white.
WPR-L01-B	Wall Plate Remote for all lifts. Single-gang black.
WPR-L01-S	Wall Plate Remote for all lifts. Single-gang brushed steel.
REM-L19-RM	Rack Mount Panel Remote wired control panel. 1.75" x 19" EIA. Black.
REM-L02-WLKY-W	Locking Wall Plate Remote wired control panel with security key lock. 2-gang, white.
REM-L02-WLKY-B	Locking Wall Plate Remote wired control panel with security key lock. 2-gang, black.
REM-L02-WLKY-S	Locking Wall Plate Remote wired control panel with security key lock. 2-gang, brushed steel.
SPK-DL	Spare Parts Kit - Includes control electronics, timing sprocket, limit switches, multi meter, motor control box.
EBR	Emergency Brake Release - Lowers lift for service access. Recommended when access to a retracted lift is restricted i.e., drywall. Must be purchased at the same time as the lift.